With six programmable time periods for battery charging and discharging, compatibility with a diesel generator, smart load application, and more…
The Deye Residential Energy Storage System consists of a PV array, hybrid inverter, battery, electrical equipment, and grid or diesel generator. The aim of this design is to store the surplus energy in the battery. This then supplies the load when needed. It improves energy independence and reduces electricity bills.
The intelligent monitoring platform enables one to get live information about the status of their system. Additionally, it supports setting parameters and updating firmware for inverter, working as per the requirement during the day (bears load and charges simultaneously) and at night (discharging).
In case of excess energy generation, it can be sold into the mains grid too. The battery storage is triggered (UPS) during a grid outage to power the household appliances. There are time-dependent electricity tariffs in most countries. Deye hybrid inverter is your go-to solution to regulate electricity usage and reduce electricity bills as it has six programmable time periods for battery charging and discharging (stated in the table below):
| Time | |
| 08-10:00 | PV and battery supply the load together |
| 10-15:00 | PV powers the load and charges the battery; the excess energy flows to the grid |
| 15-18:00 | PV and battery supply the load together |
| 18-23:00 | The battery powers the load |
| 01-05:00 | Grid charges battery and powers the load simultaneously |
| 05-08:00 | The battery powers the load |
This energy storage system ensures the smooth function of electrical appliances including air conditioners with its four milliseconds automatic switching time in case of grid failure. Deye hybrid inverter is completely compatible with a diesel generator and capable of starting and stopping it (under certain conditions). This avoids the wastage of diesel oil and unpleasant noise caused due to long time running.
Smart Load Application: This hybrid inverter supports a ‘smart load application’, implying that the diesel generator can provide output directly to the load. When the PV power is sufficient and the battery bank SOC exceeds 95%, ‘Smart Load Port’ will switch on automatically and power the load connected. When the battery bank SOC is less than 90%, the ‘Smart Load Port’ will switch off automatically.
Grid Peak Shaving application: This helps reduce your electricity bills. These inverters allow the users to set the maximum amount of grid power, and the surplus energy is directed to PV or the battery bank. In cases like these, the mains grid electricity rate witnesses a dramatic drop.
Deye Hybrid Inverter can be used to retrofit existing solar systems with its air conditioner couple feature. Micro-inverter plant and energy storage system can be integrated without burning a hole in your pocket for covering power station renovations costs via the diesel generator port of the hybrid inverter.
Deye Hybrid Inverter can increase the capacity of the system to 80kW/128kW by fitting in one system with up to the maximum of 16 pieces in parallel. The cherry on the top is the compatibility of a parallel system with different grid types (230/400VAC, 120/208VAC, and 127/220VAC). The parallel system does not need an additional control device due to its advanced control algorithm and provides a system, which is both stable and reliable.
Main Features:
- Max charging current and discharging current of 120A for 5k model, 190A for 8k model
- Backup power 5kW for 5K model and 8kW for 8K model
- Max charging efficiency > 95.5%
- Peak startup power 10000W 10S for 5K model, and 160000W for 8K model
- Backup switch time 4ms
- Equipped with x2 CAN port for BMS and parallel, x1 RS485 port for BMS, x1 RS232 port for remotely control, x1 DRM port
- Built-in overcurrent switch, saving investment
- Approved by IEC, CE, VDE4105, AS4777, EN50549, CEI, G98/G99, NRS2017, XP C15-712-3, ABNT NBR 16149/16150
- Colorful touch LCD, IP65 protection degree
- Zero-export application
